InClean Health

If you are considering a purification unit and you have a fluoridated water supply, it is highly recommended that you remove this proven harmful contaminate. (Learn more about fluoride dangers: InCleanHealth.com/blog/fluoride)

Fluoride is difficult to remove, so most purification brands avoid mentioning it. Standard purification methods, such as Granular Activated Carbon (GAC) and Carbon Blocks, will NOT remove fluoride. This includes all PUR, Brita, Aquasana, etc. filters on the market.

Outside of Distillation and Reverse Osmosis, both of which also remove ALL beneficial trace minerals, there are two primary ways to remove Fluoride. Activated Alumina and BC-Carbon.

Activated AluminaActivated Alumina is the most commonly used fluoride removal media today. This media is essentially granulated or powdered aluminum (aluminum oxide) that is preconditioned with chemicals. It is generally quite effective at removing fluoride, but is a toxic compound in its own right. In fact, if you are considering any filter system with Activated Alumina, be sure the system has KDF media DOWNSTREAM of the Activated Alumina. This will offer some level of protection when Alumina makes its way into your water, as it will. You can expect a greater than 90% removal of Fluoride with Activated Alumina.

Summary:
Effective, Toxic, Contaminates Landfills & Groundwater

Bone-Char CarbonBC-Carbon has been used for centuries (ancient Egypt) to remove naturally occurring fluoride from water, although most companies have never heard of it. In addition to being little known, BC-Carbon is not more widely used because it only removes Fluoride to greater than 70%. This is because BC-Carbon also likes to bond with heavy metals. We have found this limitation can be overcome by removing most contaminates, including heavy metals, BEFORE water reaches the BC-Carbon, in addition to using more of it. In properly designed systems, you can also expect to achieve a greater than 90% removal of Fluoride with BC-Carbon.

Summary:
Effective (when used correctly), Non-Toxic, Environmentally Friendly, Renewable Resource

We previously used Activated Alumina on all of our Fluoride filters here at AquaLiv Inc., but have since re-engineered our entire line for use with BC-Carbon. When it comes to designing filters systems, our commitment is to create the most effective, natural, and safe, systems possible- for you and the planet.

Customer Verified: We knew our all-natural fluoride reducing technology could remove near 100% of municipally added fluoride without also removing beneficial minerals. A customer with over 5x that amount of fluoride had our system tested and it still removed 81%! The testing laboratory was so impressed, they inquired about the make and model of filter. (test report available upon request)